Video · 8:05
How to Read Your ERMI Results: Every Part of the Lab Sheet
Your ERMI results came back as one score, 36 Latin names and 36 numbers, and it's hard to tell what any of it means. This video walks through every part of a lab sheet: where the score comes from, what the names and the numbers mean, what “not detected” means, how a number becomes points, and how a mold's reference level shows which molds stood out.
Pressing play loads the video from YouTube, and Google's privacy policy applies to it. Nothing loads from YouTube before then. Our privacy policy.
The sheet in this video is an example made up for it. No real home or lab is shown.
Transcript
0:00 Your results are back
You've been waiting for your ERMI results. Then they finally arrive, and you open the report, a little nervous. It's one score, thirty-six Latin names, and thirty-six numbers. You read it all, and wonder what any of it means. Sound familiar? In this video, we'll go through every part of it. This sheet is made up for the video, so no real home is on screen.
Labs lay out their sheets in their own ways. But every ERMI result is built from the same parts. There's the score at the top. Below it are the names of the thirty-six molds. Next to each name is a number. And some rows have no number at all. Let's start at the top.
0:47 The score
The score comes first. This one is eleven point five four. The lab doesn't measure it directly. It works it out from the thirty-six numbers below. Those thirty-six molds come in two lists. Twenty-six Group 1 molds add to the score. Ten Group 2 molds subtract from it. So the score is what the first list adds, minus what the second list takes away.
That's why two very different sheets can end up with the same score. To see how the adding works, we need to read the names and the numbers first.
1:23 The 36 names
First, the names. Each mold has a two-part Latin name: a genus, and then a species. Aspergillus niger is one of them. Ten of the twenty-six Group 1 molds are in the Aspergillus genus. Some lines name two molds, with a slash between them. The lab's test can't tell those close relatives apart, so it measures them together.
One mold shows up twice, numbered one and two. Those are two separate measurements of the same species. You don't need to pronounce any of them. What matters is which list each one is on, because that decides whether it adds to the score or subtracts from it.
2:06 The numbers: spore equivalents per mg
Now, the numbers. Each one is in spore equivalents per milligram of dust. That's a mouthful, so let's take it in two halves. Per milligram of dust first. The lab sieves the dust, and weighs out a tiny portion to test. In the studies behind the test, it was five milligrams. That's about a quarter of the weight of a grain of rice.
Every number on the sheet is per milligram, so all thirty-six are on the same scale. Now, spore equivalents. The lab doesn't count spores under a microscope. It measures DNA. First, the lab adds a known number of spores of one more mold, called the reference mold. It goes through every step, right along with the dust.
If a step loses some DNA, the reference loses about the same share. That tells the lab how much to correct for. Then it pulls the DNA out of the dust, and runs one test for each of the thirty-six molds. Each test copies one mold's DNA over and over, until there's enough to see. The more there was to start with, the sooner it shows up.
To turn that into a number, the lab compares it with tests it ran on known amounts of spores. So one spore equivalent is the DNA that one spore carries. It isn't a count of spores. Broken spores, dead spores, and bits of hyphae all carry DNA, and all of it counts. That's the short version. Our site walks through every step, with the studies behind it.
3:45 Not detected
Some rows have no number at all. They say ND, for not detected. Every test has a floor. Below it, the signal is too weak to count reliably. So not detected means below the floor. It doesn't prove the mold isn't there. On this sheet, a mold that isn't detected adds nothing to the score, and takes nothing away.
And here's something that surprises people. A one adds nothing either. To see why, let's do the math.
4:18 How a number becomes points
Here's the math, without the math class. The score doesn't add up the numbers as they are. It counts their zeros. Ten counts as one. A hundred counts as two. A thousand counts as three. And a one counts as zero. That's why a one adds nothing. Numbers in between land in between. At two hundred sixty, Aspergillus niger counts as about two point four.
So ten times the spores of a Group 1 mold adds one point to the score. And ten times the spores of a Group 2 mold takes one point off. Watch Penicillium chrysogenum. It's a Group 2 mold, at seven. Make it seventy, and the score drops by one full point. More of it means a lower score.
Counting zeros also means a big number adds less than it looks. A Group 1 mold at a million adds just six points. Add up all twenty-six Group 1 molds, and you get twenty-one point six six. The ten Group 2 molds take off ten point one two. What's left is the score.
5:30 Reference levels: which molds stood out
The score is built from the numbers alone. But a number on its own doesn't tell you much. Aspergillus niger came in at two hundred sixty. Is that a lot? Every mold has a reference level. It's that mold's baseline from an earlier national survey of homes. Each mold has its own, because some molds are common in dust and others are rare.
Aspergillus niger has a reference level of four. So two hundred sixty is sixty-five times its reference level. Wallemia sebi's is eighteen. At one hundred thirty, it's about seven times. At ten times its reference level or more, our reports say a mold stood out. On this sheet, three did. At sixty-five times, the top one is Aspergillus niger. Two more are at seventeen and twelve times.
Some molds are strong indicators of water damage, like Chaetomium globosum and Stachybotrys chartarum. They get a closer look, flagged from just three times their reference level. On this sheet, Chaetomium globosum is at five times, so it's flagged too. Your lab sheet may not print reference levels at all. Each mold's page on our site lists its own.
6:50 What the sheet can't tell you
There are three things no line on this sheet can tell you. It can't tell you where any of this mold is growing. It can't tell you whether it's growing right now, or settled into the dust a while ago. And it can't tell you anything about anyone's health. A dust test shows what was in the dust.
Questions about the building itself need someone on site, like an independent mold inspector or assessor.
7:18 Reading all 36
So how do you read all thirty-six? Start with the molds that stood out, and ask what each one needs to grow. Aspergillus niger can grow with just high humidity. The other two need condensation. And the flagged one, Chaetomium globosum, needs materials that stay wet. That's a different picture from eleven point five four on its own.
That's one piece of an ExplainmyERMI report. The full report also covers every mold on your sheet, your local climate, and a printable walk-through guide. Get your ERMI explained, at explainmyermi.com.
For education only. Not a mold inspection, a diagnosis or medical advice.